When Road speed limit exceeded is enabled in the Event Trigger menu, the dashcam detects when the vehicle goes faster than the speed limit of the road it is driving on, and sends the video of that moment to the cloud.
- Speeding is detected against each road’s speed limit, not a fixed speed you set.
- The front video is uploaded to the cloud automatically.
- You can receive Push / Email notifications when the event occurs.
How does it work?
- While your dashcam is online, it uses its location and map-based speed limits to detect when you drive about 10 km/h (about 6 mph) or more over the limit for about 12 seconds or longer.
- Detection works on roads where speed limit data is available.
- When this happens, the front video of that moment is sent to the cloud, unless it was already recorded as an event (like an impact).
- Sending videos uses your dashcam’s mobile data (LTE) and cloud storage
Road Speed Limit Exceeded vs. Speed Alert
- Speed Alert: Triggers an event when the vehicle exceeds the speed you set.
- Road speed limit exceeded: Triggers an event when the vehicle exceeds the speed limit of the current road.
- This feature is available only in the FLEETA App and Web Viewer. It is not supported in the BlackVue App.
💡 Note: About speed limit data
- Speed limits come from map data (OpenStreetMap). On some roads, this data may be missing or out of date, so speeding may not be detected or may be detected differently.
- This feature doesn’t alert the driver while driving. Always follow posted speed limits and road signs.
Supported Models #
Category | Supported |
|---|---|
DR750G Pro | Firmware v1.009 or later |
DR750X Plus | Firmware v1.013 or later |
DR750X LTE Plus | Firmware v1.008 or later |
DR900X Plus | Firmware v1.011 or later |
SIGMASTAR series | Excluding 590X series |
ELITE series | Excluding ELITE AIR |
Setting Up in the App #
- Go to Settings > Event Trigger for the dashcam you want to configure.
- Tap Road speed limit exceeded (located just above Speed Alert).
- Turn the toggle ON. The default is OFF.
Old Model
- On the Live Event Upload screen, turn on Road speed limit exceeded, located above Speed Alert.
- Tap the ⓘ (Info) button to open a description pop-up. Tap X or OK to close it.
Setting Up in the Web Viewer #
- Open the Event Trigger settings of the dashcam you want to configure.
- Turn Road speed limit exceeded, located above Speed Alert, to ON.
- Road speed limit exceeded: Turns the feature on or off. Default: OFF.
- ⓘ (Info) button: Click to open a description pop-up. Click X or OK to close it.
- Beep Alert: Not available for this event.
If the dashcam is connected via Wi-Fi only, the item is disabled and cannot be changed.
Notification Settings #
To receive notifications for this event, turn them on in the platform where you want to receive them (App or Web Viewer). The default is OFF.
- Tap (click) Notifications on the camera card.
- Tap the gear icon to open notification settings.
- Under Push Notifications or Email Notifications, turn on Road speed limit exceeded, located above Speed Alert.
💡Note : Only Cloud-connected cameras (Online status) can receive notifications.
