---
title: Road Speed Limit Exceeded
description: "When **Road speed limit exceeded** is enabled in the **Event Trigger** menu, the dashcam detects when the vehicle goes faster than the **speed limit of the road** it is driving on, and sends the video of that moment to the…"
url: "https://cloudmanual.blackvue.com/docs/dashcam-configuration/road-speed-limit-exceeded/"
updated: "2026-11-12"
category: Dashcam Configuration
---

# Road Speed Limit Exceeded

When **Road speed limit exceeded** is enabled in the **Event Trigger** menu, the dashcam detects when the vehicle goes faster than the **speed limit of the road** it is driving on, and sends the video of that moment to the cloud.

- Speeding is detected against **each road’s speed limit**, not a fixed speed you set. 
- The **front video** is uploaded to the cloud automatically. 
- You can receive **Push / Email notifications** when the event occurs. 

***How does it work? ***

- While your dashcam is **online**, it uses its location and **map-based speed limits** to detect when you drive about **10 km/h (about 6 mph) or more** over the limit for about **12 seconds or longer**.
- Detection works on roads where **speed limit data is available.**
- When this happens, the **front video** of that moment is sent to the cloud, unless it was already recorded as an event (like an impact).
- Sending videos uses your dashcam’s **mobile data (LTE)** and **cloud storage**

***Road Speed Limit Exceeded vs. Speed Alert***

- **Speed Alert:** Triggers an event when the vehicle exceeds the speed you set. 
- **Road speed limit exceeded:** Triggers an event when the vehicle exceeds the speed limit of the current road. 
  - This feature is available **only in the FLEETA App and Web Viewer**. It is not supported in the BlackVue App.

💡 **Note: About speed limit data**

- Speed limits come from **map data (OpenStreetMap)**. On some roads, this data may be**missing or out of date**, so speeding may not be detected or may be detected differently.
- This feature **doesn’t alert the driver** while driving. Always follow **posted speed limits and road signs.**

##### Supported Models

| Category | Supported |
| --- | --- |
| DR750G Pro | Firmware v1.009 or later |
| DR750X Plus | Firmware v1.013 or later  |
| DR750X LTE Plus | Firmware v1.008 or later  |
| DR900X Plus | Firmware v1.011 or later  |
| SIGMASTAR series  | Excluding 590X series  |
| ELITE series  | Excluding ELITE AIR  |

##### Setting Up in the App

         ![](https://cloudmanual.blackvue.com/wp-content/uploads/2026/11/Road-speed-limit-exceeded_Countries-collapsed-e1794461605675-768x840.png)

1. Go to **Settings > Event Trigger** for the dashcam you want to configure. 
2. Tap **Road speed limit exceeded** (located just above Speed Alert). 
3. Turn the toggle **ON**. The default is **OFF**. 

             ![](https://cloudmanual.blackvue.com/wp-content/uploads/2026/11/DMC200-Live-event-upload-settings-768x1366.png)

**Old Model**

- On the **Live Event Upload** screen, turn on **Road speed limit exceeded**, located above Speed Alert.
- Tap the **ⓘ (Info)** button to open a description pop-up. Tap **X** or **OK** to close it. 

          When connected via Wi-Fi  This feature can only be configured while the dashcam is Cloud Connected.

##### Setting Up in the Web Viewer

         ![](https://cloudmanual.blackvue.com/wp-content/uploads/2026/11/Settings-772x1024.png)

1. Open the **Event Trigger** settings of the dashcam you want to configure. 
2. Turn **Road speed limit exceeded**, located above Speed Alert, to **ON**. 

- **Road speed limit exceeded:** Turns the feature on or off. Default: OFF. 
- **ⓘ (Info) button:** Click to open a description pop-up. Click **X** or **OK** to close it. 
- **Beep Alert:** **Not available** for this event.

**If the dashcam is connected via Wi-Fi only, the item is disabled and cannot be changed.**

##### Notification Settings

             ![](https://cloudmanual.blackvue.com/wp-content/uploads/2026/11/Push-notifications-576x1024.png)

To receive notifications for this event, turn them on in the platform where you want to receive them (App or Web Viewer). The default is OFF.

1. Tap (click) **Notifications** on the camera card. 
2. Tap the gear icon to open notification settings. 
3. Under **Push Notifications** or **Email Notifications**, turn on **Road speed limit exceeded**, located above Speed Alert. 

💡**Note : Only Cloud-connected cameras (Online status) can receive notifications. **
