BlackVue Battery Management in the BlackVue App

BlackVue Battery (B124, B-124X, B-130X)

What is the BlackVue Battery, and How to use this?

The BlackVue Battery is a rechargeable backup battery made specifically for the BlackVue dashcam series [ another dashcam is also compatible ]. This battery provides power to the dashcam when the car’s battery voltage drops below a certain level, ensuring that the dashcam continues to record in the event of a sudden power loss, such as when the car’s battery dies or the engine is turned off. The battery can be monitored and managed through the BlackVue app. To connect the battery to the app, follow these steps:

Install the BlackVue app on your smartphone or tablet, and access the “BlackVue Home” (Explore) page. Then go to “Cameras.”
1. This can be done by downloading the BlackVue app from the App Store or Google Play Store and opening it on your device.

Access the battery scan page and wait until the battery model is listed on the screen.

This can be done by navigating to the battery scan page within the BlackVue app.
Tap your BlackVue B-130X battery model on the scan list page.
1. This will initiate a connection between the battery and the app.

If the battery fails to connect to the app, check the following conditions:

Ensure that Bluetooth is enabled on your device.
Make sure that the battery is within close proximity to your device.
Ensure that the battery is fully charged.

Once the battery is connected, you can check its status and battery level.

This information will be displayed on the app’s Battery Configuration page.

Set the value of the Battery setting.

The B-130X battery has a setting page within the app, which allows you to control its behavior and performance. Currently, the only setting that can be adjusted is the beep on/off of the device.